Light Amplifiers

Devices that amplify input light. Learn More

Product	Emission Wavelength	Fiber Connector Type	Operation	Availability	Price (USD)
Fiber-Coupled Gain Chip	1035 nm (Minimum) 1050 nm (Typical) 1065 nm (Maximum)	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1035 nm (Minimum) 1050 nm (Typical) 1065 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Near IR Optical Fiber HI1060 Source Material Diode Forward Voltage 2.5 V (Maximum) Saturation Output Power 10 dBm (Typical) 12 dBm (Maximum) Forward Current 300 mA (Typical) 350 mA (Maximum) Voltage 2.7 V (Maximum) Wavelength Bandwidth (FWHM) 30 nm (Minimum, CW) 35 nm (Typical, CW) 40 nm (Maximum, CW) Thermal Resistance 9.5 kΩ (Minimum) 10 kΩ (Typical) 10.5 kΩ (Maximum) Noise Level 7 dB (Minimum) 8 dB (Typical) 9 dB (Maximum) Polarization Dependent Gain 10 dB (Typical) Voltage Ripple 1 dB (Typical) 2 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	1532 - 1565 nm (C-band single channel) 1547.8 nm	FC/APC (Input) FC/APC (Output)	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1532 - 1565 nm (C-band single channel) 1547.8 nm Fiber Connector Type FC/APC (Input) FC/APC (Output) Operation CW Emission Range Short-Wave IR Optical Fiber PM1550 Source Material Ytterbium Output Optical Power 5.012 W (tested with 37 dBm, 1550 nm, 10 dBm input) Interfaces RS-232 Dimensions 483 x 280 x 38 mm (Bench-Top) 139 x 235 x 70 mm (Module) Supply Voltage 100 - 240 V Noise Level 5 dB (input 0 dBm, 1550 nm, Typical, at 40 dB gain) Power Monitor +15 to +35 dBm (Output), -15 dBm to +5 dBm (Input) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1528 nm (Minimum) 1562 nm (Maximum)	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1528 nm (Minimum) 1562 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber SMF-28E+ Source Material Diode Forward Voltage 1.6 V (Typical) 1.8 V (Maximum) Saturation Output Power 12 dBm (at -3 dB, Minimum) 14 dBm (at -3 dB, Typical) Operating Current 450 mA (Typical) 500 mA (Maximum) Length 1.5 mm (Typical) TEC Current 230 mA (Typical) 1.5 A (Maximum) TEC Voltage 500 mV (Typical) 4 V (Maximum) Thermistor Resistance 10 kΩ (Typical) Signal Gain 10 dB (at -20 dBm, Minimum, Small Signal Gain) 13 dB (at -20 dBm, Typical, Small Signal Gain) Noise Level 8 dB (Typical) 9.5 dB (Maximum) Polarization Dependent Gain 1 dB (Typical) 1.8 dB (Maximum) Refractive Index 3.2 (Typical) Voltage Ripple 0.1 dB (Typical) 0.5 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1528 - 1566 nm	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1528 - 1566 nm Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Interfaces RS-232 Polarization Extinction Ratio < 0.4576 dB (10%) Fiber Length 1 m (±100 mm) Pump Wavelength 1425 - 1465 nm Operating Temperature -5 to 55 °C Noise Level 0 dB Operating Voltage 5 V 12 V (can be customized) Power Consumption < 30 W Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1290 - 1310 nm	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1290 - 1310 nm Fiber Connector Type FC/APC Operation CW Emission Range Near IR Source Material Diode Output Optical Power > 10 mW (10 dBm, Saturated) Interfaces RS-232 Optical Isolation > 45 dB (Input) > 45 dB (Output) Fiber Length 1 m (±100 mm) Weight < 200 g Operating Temperature -5 to 65 °C Input Optical Power 3.162 - 316.2 μW (-25 to -5 dBm) Signal Gain 15 - 20 dB (Small Signal Gain) Noise Level 7.5 dB Operating Voltage 5 V Polarization Dependent Gain < 2 dB Power Consumption < 10 W Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1290 nm (Minimum) 1330 nm (Maximum)	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1290 nm (Minimum) 1330 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Near IR Optical Fiber SMF-28E Source Material Diode Forward Voltage 1.6 V (Typical) 1.8 V (Maximum) Saturation Output Power 7 dBm (at -3 dB, Minimum) 10 dBm (at -3 dB, Typical) Operating Current 150 mA (Typical) 200 mA (Maximum) Length 1.5 mm (Typical) Polarization Extinction Ratio 15 dB (Minimum) 20 dB (Typical) TEC Current 230 mA (Typical) 1.5 A (Maximum) TEC Voltage 500 mV (Typical) 4 V (Maximum) Thermistor Resistance 10 kΩ (Typical) Signal Gain 15 dB (at -20 dBm, Minimum, Small Signal Gain) 18 dB (at -20 dBm, Typical, Small Signal Gain) Noise Level 5 dB (Typical) 7 dB (Maximum) Polarization Dependent Gain 1 dB (Typical) 1.8 dB (Maximum) Refractive Index 3.2 (Typical) Voltage Ripple 0.1 dB (Typical) 0.5 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1528 nm (Minimum) 1562 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1528 nm (Minimum) 1562 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber PM Fiber Source Material Diode Forward Voltage 1.6 V (Typical) 1.8 V (Maximum) Saturation Output Power 12 dBm (at -3 dB, Minimum) 13.5 dBm (at -3 dB, Typical) Operating Current 450 mA (Typical) 500 mA (Maximum) Length 1.5 mm (Typical) Polarization Extinction Ratio 15 dB (Minimum) 20 dB (Typical) TEC Current 230 mA (Typical) 1.5 A (Maximum) TEC Voltage 500 mV (Typical) 4 V (Maximum) Thermistor Resistance 10 kΩ (Typical) Signal Gain 20 dB (at -15 dBm, Minimum, Small Signal Gain) 25 dB (at -15 dBm, Typical, Small Signal Gain) Noise Level 8 dB (Typical) 9.5 dB (Maximum) Polarization Dependent Gain 1 dB (Typical) 1.8 dB (Maximum) Refractive Index 3.2 (Typical) Voltage Ripple 0.1 dB (Typical) 0.5 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1050 nm (Minimum, Gain Mean Wavelength) 1065 nm (Typical, Gain Mean Wavelength) 1070 nm (Maximum, Gain Mean Wavelength)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1050 nm (Minimum, Gain Mean Wavelength) 1065 nm (Typical, Gain Mean Wavelength) 1070 nm (Maximum, Gain Mean Wavelength) Fiber Connector Type FC/APC Operation CW Emission Range Near IR Optical Fiber SM Fiber Source Material Diode Forward Voltage 1.5 V (Typical) 1.7 V (Maximum) Saturation Output Power 15 dBm (at -3 dB, Minimum) 18 dBm (at -3 dB, Typical) Output Optical Power 40 mW (Minimum) 60 mW (Typical) Operating Current 400 mA (Typical) 500 mA (Maximum) Forward Current 1 A (Maximum) Voltage 4 V (Maximum) Polarization Extinction Ratio 15 dB (Minimum) 19 dB (Typical) Reverse Voltage 2 V (Maximum) Gain Saturation -3 dB (at 15 dBm) -3 dB (at 18 dBm) Input Optical Power 100 mW (20 dBm, Maximum) Signal Gain 37 dB (Minimum, Small Signal Gain) 40 dB (Typical, Small Signal Gain) Fall Time 500 ps (Typical) Output Mode Fiber Coupled Storage Temperature -40 °C (Minimum) 85 °C (Maximum) Operating Temperature 0 °C (Minimum, Case) 70 °C (Maximum, Case) 10 °C (Minimum, Chip) 40 °C (Maximum, Chip) Noise Level 8 dB (Typical) Rise Time 150 ps (Typical, ASE) Voltage Ripple 0.02 dB (Typical) 0.2 dB (Maximum) Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1290 nm (Minimum) 1330 nm (Maximum)	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1290 nm (Minimum) 1330 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Near IR Optical Fiber PM Fiber Source Material Diode Forward Voltage 1.6 V (Typical) 1.8 V (Maximum) Saturation Output Power 7 dBm (at -3 dB, Minimum) 10 dBm (at -3 dB, Typical) Operating Current 150 mA (Typical) 200 mA (Maximum) Length 1.5 mm (Typical) Polarization Extinction Ratio 15 dB (Minimum) 20 dB (Typical) TEC Current 230 mA (Typical) 1.5 A (Maximum) TEC Voltage 500 mV (Typical) 4 V (Maximum) Thermistor Resistance 10 kΩ (Typical) Signal Gain 15 dB (at -20 dBm, Minimum, Small Signal Gain) 18 dB (at -20 dBm, Typical, Small Signal Gain) Noise Level 5 dB (Typical) 7 dB (Maximum) Polarization Dependent Gain 1 dB (Typical) 1.8 dB (Maximum) Refractive Index 3.2 (Typical) Voltage Ripple 0.1 dB (Typical) 0.5 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	1532 - 1565 nm (C-band single channel) 1547.8 nm	FC/APC (Input) FC/APC (Output)	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1532 - 1565 nm (C-band single channel) 1547.8 nm Fiber Connector Type FC/APC (Input) FC/APC (Output) Operation CW Emission Range Short-Wave IR Optical Fiber SMF-28E Source Material Ytterbium Output Optical Power 5.012 W (tested with 37 dBm, 1550 nm, 10 dBm input) Interfaces RS-232 Dimensions 483 x 280 x 38 mm (Bench-Top) 139 x 235 x 70 mm (Module) Supply Voltage 100 - 240 V Noise Level 5 dB (input 0 dBm, 1550 nm, Typical, at 40 dB gain) Power Monitor +15 to +35 dBm (Output), -15 dBm to +5 dBm (Input) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1570 nm (Minimum) 1590 nm (Typical) 1610 nm (Maximum)	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1570 nm (Minimum) 1590 nm (Typical) 1610 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber SMF-28E+ Source Material Diode Forward Voltage 2.5 V (Maximum) Saturation Output Power 8 dBm (Minimum) 9 dBm (Typical) 10 dBm (Maximum) Forward Current 300 mA (Typical) 350 mA (Maximum) Voltage 2.7 V (Maximum) Wavelength Bandwidth (FWHM) 30 nm (Minimum, CW) 35 nm (Typical, CW) 40 nm (Maximum, CW) Thermal Resistance 9.5 kΩ (Minimum) 10 kΩ (Typical) 10.5 kΩ (Maximum) Noise Level 7 dB (Minimum) 8 dB (Typical) 9 dB (Maximum) Polarization Dependent Gain 10 dB (Typical) Voltage Ripple 1 dB (Typical) 2 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	1551.7 nm (1550.92nm)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1551.7 nm (1550.92nm) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Output Optical Power 100 μW (-10 dBm) ~ 1 mW (0 dBm) Interfaces RS-232 Optical Isolation > 45 dB (Input) > 45 dB (Output) Fiber Length 1 m (±100 mm) Weight < 160 g Operating Temperature -20 to 65 °C Input Optical Power 100 nW - 316.2 μW (-40 to -5 dBm) Noise Level 4.5 dB Operating Voltage 5 V Power Consumption < 6 W Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1650 nm	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1650 nm Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber SMF-28E+ Source Material Diode Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1528 nm (Minimum) 1562 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1528 nm (Minimum) 1562 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber PM Fiber Source Material Diode Forward Voltage 1.6 V (Typical) 1.8 V (Maximum) Saturation Output Power 15 dBm (at -3 dB, Minimum) 16.5 dBm (at -3 dB, Typical) Operating Current 450 mA (Typical) 500 mA (Maximum) Length 1.5 mm (Typical) Polarization Extinction Ratio 15 dB (Minimum) 20 dB (Typical) TEC Current 230 mA (Typical) 1.5 A (Maximum) TEC Voltage 500 mV (Typical) 4 V (Maximum) Thermistor Resistance 10 kΩ (Typical) Signal Gain 20 dB (at -15 dBm, Minimum, Small Signal Gain) 25 dB (at -15 dBm, Typical, Small Signal Gain) Noise Level 8 dB (Typical) 9.5 dB (Maximum) Polarization Dependent Gain 1 dB (Typical) 1.8 dB (Maximum) Refractive Index 3.2 (Typical) Voltage Ripple 0.1 dB (Typical) 0.5 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	1528 - 1567 nm	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1528 - 1567 nm Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Output Optical Power < 10 μW (-20 dBm) 1 mW (0 dBm) ~ 251.2 mW (24 dBm) Interfaces RS-232 Operating Temperature -5 to 55 °C Input Optical Power 3.162 μW - 7.943 mW (-25 to 9 dBm) Signal Gain 15 - 25 dB Noise Level 5.5 dB (Maximum) Optical Return Loss > 45 dB Operating Voltage 220 V (AC) Polarization Dependent Gain < 0.3 dB Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1528 nm (Minimum) 1562 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1528 nm (Minimum) 1562 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber PM Fiber Source Material Diode Forward Voltage 1.6 V (Typical) 1.8 V (Maximum) Saturation Output Power 23 dBm (at -3 dB, Minimum) 26 dBm (at -3 dB, Typical) Operating Current 1 A (Typical) 1.5 A (Maximum) Length 1.5 mm (Typical) TEC Current 230 mA (Typical) 1.5 A (Maximum) TEC Voltage 500 mV (Typical) 4 V (Maximum) Thermistor Resistance 10 kΩ (Typical) Signal Gain 30 dB (at -20 dBm, Minimum, Small Signal Gain) 35 dB (at -20 dBm, Typical, Small Signal Gain) Noise Level 6 dB (Typical) 9.5 dB (Maximum) Polarization Dependent Gain 5.2 dB (Typical) 6.3 dB (Maximum) Refractive Index 3.2 (Typical) Voltage Ripple 0.1 dB (Typical) 0.5 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	1538 - 1565 nm	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1538 - 1565 nm Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Output Optical Power 100 mW (Minimum) 8 W (Maximum) Interfaces RS-422 Optical Isolation > 45 dB (Input) > 45 dB (Output) Fiber Length 2 m (±100 mm) Operating Temperature -5 to 55 °C Input Optical Power 10 mW (10 - 10 dBm) Noise Level 6.5 dB Operating Voltage 220 V (AC) Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	1538 - 1565 nm	FC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1538 - 1565 nm Fiber Connector Type FC Operation CW Emission Range Short-Wave IR Output Optical Power 100 mW (Minimum) 5 W (Maximum) Interfaces RS-422 Optical Isolation > 45 dB (Input) > 45 dB (Output) Operating Temperature -5 to 55 °C Input Optical Power 100 μW - 10 mW (-10 to 10 dBm) Noise Level 6.5 dB Operating Voltage 220 V (AC) Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	1524 nm (Minimum) 1572 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1524 nm (Minimum) 1572 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber SMF-28 Source Material Erbium Output Optical Power 100 mW Optical Isolation > 35 dB (Input, Output) Signal Gain 23 dB (Maximum, Small Signal Gain) Noise Level 5.5 dB (at 20 dBm, Typical) 6.5 dB (at 20 dBm, Maximum) Power Monitor Output optical power monitoring Polarization Dependent Gain < 0.5 dB Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	900 nm (Minimum) 910 nm (Typical) 920 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 900 nm (Minimum) 910 nm (Typical) 920 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Near IR Optical Fiber HI1060 Source Material Diode Forward Voltage 2.5 V (Maximum) Saturation Output Power 8 dBm (Minimum) 9 dBm (Typical) 10 dBm (Maximum) Forward Current 400 mA 300 mA (Typical) 350 mA (Maximum) Voltage 2.7 V (Maximum) Reverse Voltage 1.8 V (LD) Wavelength Bandwidth (FWHM) 20 nm (Minimum, CW) 25 nm (Typical, CW) 30 nm (Maximum, CW) Thermal Resistance 9.5 kΩ (Minimum) 10 kΩ (Typical) 10.5 kΩ (Maximum) Noise Level 7 dB (Minimum) 8 dB (Typical) 9 dB (Maximum) Polarization Dependent Gain 10 dB (Typical) Voltage Ripple 1 dB (Typical) 2 dB (Maximum) Output Mode Fiber Coupled Storage Temperature -20 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	-	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Fiber Connector Type FC/APC Operation CW Optical Fiber PM Fiber Output Optical Power 3.162 mW (5 dBm) ~ 63.1 mW (18 dBm) Interfaces RS-422 Optical Isolation > 45 dB (Input) > 45 dB (Output) Fiber Length 1 m (±100 mm) Weight < 200 g Operating Temperature -20 to 65 °C Input Optical Power 1 - 100 μW (-30 to -10 dBm) Noise Level 3 dB (slow axis) 5.5 dB (dual axis) Operating Voltage 5 V Power Consumption < 6 W Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	670 nm (Minimum) 680 nm (Typical) 690 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 670 nm (Minimum) 680 nm (Typical) 690 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Visible Optical Fiber HI780 Source Material Diode Forward Voltage 2.5 V (Maximum) Saturation Output Power 7 dBm (Minimum) 8 dBm (Typical) 9 dBm (Maximum) Forward Current 200 mA (Typical) 500 mA (Maximum) Voltage 2.7 V (Maximum) Reverse Voltage 1.8 V (LD) Wavelength Bandwidth (FWHM) 6 nm (Minimum, CW) 8 nm (Typical, CW) Thermal Resistance 9.5 kΩ (Minimum) 10 kΩ (Typical) 10.5 kΩ (Maximum) Noise Level 7 dB (Minimum) 8 dB (Typical) 9 dB (Maximum) Polarization Dependent Gain 10 dB (Typical) Voltage Ripple 1 dB (Typical) 2 dB (Maximum) Output Mode Fiber Coupled Storage Temperature -20 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber Amplifier	-	FC/APC	Pulsed	Contact Supplier	Add to cart to request quote
Product Code Fiber Connector Type FC/APC Operation Pulsed Interfaces RS-232 Optical Isolation > 45 dB (Output) Fiber Length 1 m (±100 mm) Peak Optical Power 10 - 500 W Pulse Duration 1 - 100 ns Operating Temperature -20 to 65 °C Input Optical Power 100 μW - 50 mW (Peak) Optical Return Loss > 45 dB Pulse Duration (Range) nanosecond (ns) Operating Voltage 5 V Polarization Dependent Gain < 0.5 dB Output Mode Fiber Coupled Storage Temperature -40 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1050 nm (Minimum, Gain Mean Wavelength) 1065 nm (Typical, Gain Mean Wavelength) 1070 nm (Maximum, Gain Mean Wavelength)	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 1050 nm (Minimum, Gain Mean Wavelength) 1065 nm (Typical, Gain Mean Wavelength) 1070 nm (Maximum, Gain Mean Wavelength) Fiber Connector Type FC/APC Operation CW Emission Range Near IR Optical Fiber PM Fiber Source Material Diode Forward Voltage 1.5 V (Typical) 1.7 V (Maximum) Saturation Output Power 15 dBm (at -3 dB, Minimum) 18 dBm (at -3 dB, Typical) Output Optical Power 40 mW (Minimum) 60 mW (Typical) Operating Current 400 mA (Typical) 500 mA (Maximum) Forward Current 1 A (Maximum) Voltage 4 V (Maximum) Polarization Extinction Ratio 15 dB (Minimum) 19 dB (Typical) Reverse Voltage 2 V (Maximum) Gain Saturation -3 dB (at 15 dBm) -3 dB (at 18 dBm) Input Optical Power 100 mW (20 dBm, Maximum) Signal Gain 37 dB (Minimum, Small Signal Gain) 40 dB (Typical, Small Signal Gain) Fall Time 500 ps (Typical) Output Mode Fiber Coupled Storage Temperature -40 °C (Minimum) 85 °C (Maximum) Operating Temperature 0 °C (Minimum, Case) 70 °C (Maximum, Case) 10 °C (Minimum, Chip) 40 °C (Maximum, Chip) Noise Level 8 dB (Typical) Rise Time 150 ps (Typical, ASE) Voltage Ripple 0.02 dB (Typical) 0.2 dB (Maximum) Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	820 nm (Minimum) 825 nm (Typical) 830 nm (Maximum)	FC/APC	CW	In stock	Add to cart to request quote
Product Code Emission Wavelength 820 nm (Minimum) 825 nm (Typical) 830 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Near IR Optical Fiber HI780 Source Material Diode Forward Voltage 2.5 V (Maximum) Saturation Output Power 8 dBm (Minimum) 9 dBm (Typical) 10 dBm (Maximum) Forward Current 400 mA 300 mA (Typical) 350 mA (Maximum) Voltage 2.7 V (Maximum) Reverse Voltage 1.8 V (LD) Wavelength Bandwidth (FWHM) 20 nm (Minimum, CW) 25 nm (Typical, CW) 30 nm (Maximum, CW) Thermal Resistance 9.5 kΩ (Minimum) 10 kΩ (Typical) 10.5 kΩ (Maximum) Noise Level 7 dB (Minimum) 8 dB (Typical) 9 dB (Maximum) Polarization Dependent Gain 10 dB (Typical) Voltage Ripple 1 dB (Typical) 2 dB (Maximum) Output Mode Fiber Coupled Storage Temperature -20 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	1528 nm (Minimum) 1562 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 1528 nm (Minimum) 1562 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Short-Wave IR Optical Fiber SMF-28E Source Material Diode Forward Voltage 1.6 V (Typical) 1.8 V (Maximum) Saturation Output Power 23 dBm (at -3 dB, Minimum) 26 dBm (at -3 dB, Typical) Operating Current 1 A (Typical) 1.5 A (Maximum) Length 1.5 mm (Typical) TEC Current 230 mA (Typical) 1.5 A (Maximum) TEC Voltage 500 mV (Typical) 4 V (Maximum) Thermistor Resistance 10 kΩ (Typical) Signal Gain 30 dB (at -20 dBm, Minimum, Small Signal Gain) 35 dB (at -20 dBm, Typical, Small Signal Gain) Noise Level 6 dB (Typical) 9.5 dB (Maximum) Polarization Dependent Gain 5.2 dB (Typical) 6.3 dB (Maximum) Refractive Index 3.2 (Typical) Voltage Ripple 0.1 dB (Typical) 0.5 dB (Maximum) Output Mode Fiber Coupled Supplier Location Singapore See product details More from LD-PD PTE. LTD.
Fiber-Coupled Gain Chip	760 nm (Minimum) 790 nm (Typical) 810 nm (Maximum)	FC/APC	CW	Contact Supplier	Add to cart to request quote
Product Code Emission Wavelength 760 nm (Minimum) 790 nm (Typical) 810 nm (Maximum) Fiber Connector Type FC/APC Operation CW Emission Range Visible Optical Fiber HI780 Source Material Diode Forward Voltage 2.5 V (Maximum) Saturation Output Power 8 dBm (Minimum) 9 dBm (Typical) 10 dBm (Maximum) Forward Current 400 mA 250 mA (Typical) 300 mA (Maximum) Voltage 2.7 V (Maximum) Reverse Voltage 1.8 V (LD) Wavelength Bandwidth (FWHM) 20 nm (Minimum, CW) 25 nm (Typical, CW) 30 nm (Maximum, CW) Thermal Resistance 9.5 kΩ (Minimum) 10 kΩ (Typical) 10.5 kΩ (Maximum) Noise Level 7 dB (Minimum) 8 dB (Typical) 9 dB (Maximum) Polarization Dependent Gain 10 dB (Typical) Voltage Ripple 1 dB (Typical) 2 dB (Maximum) Output Mode Fiber Coupled Storage Temperature -20 to 85 °C Supplier Location Singapore See product details More from LD-PD PTE. LTD.